Business

The Right Angle: Best Practices for Installing Angled Skirting Boards

How to install skirting boards - Intrim MouldingsSkirting boards are an essential element of any room’s decor. They not only serve as a finishing touch to a room but also protect the lower walls from damage. If you’re thinking of installing skirting board, this post will provide you with all the necessary information to take accurate measurements and ensure a perfect installation.

Accurate measurement is crucial to a successful skirting board installation. Precise measurements will ensure a snug fit, which will make the installation process much easier. Inaccurate measurements, on the other hand, can lead to uneven skirting boards and a less-than-professional finish.

 

  1. Measure the perimeter of the room

The first step in measuring for your skirting boards is to measure the perimeter of the room. Using a measuring tape, measure the length of each wall and add the measurements together. This will give you the total length of skirting board required for the room.

It’s important to measure from wall to wall rather than skirting board to skirting board. This ensures that your skirting boards will align with the corners of the room, giving a neat and professional finish.

 

  1. Determine the height of the skirting board

Once you have measured the perimeter of the room, you need to decide on the height of the skirting board. Typically, skirting boards range in height from 75mm to 150mm. The height you choose will depend on the room’s décor, the ceiling height, and personal preference.

 

When deciding on the height of your skirting board, remember to factor in the thickness of the flooring and the underlay. You want to ensure that your skirting board sits flush with the floor.

 

  1. Measure the length of each wall

With the perimeter and height of the skirting board established, it’s time to measure the length of each wall for precise fitting. To do this, measure from corner to corner along the ground. It’s crucial that you measure the baseboard’s precise lengths to avoid gaps, overlapping, or any other unsightly outcomes.

 

  1. Cut the skirting board to size

When you have your measurements, choose the right materials and cut the skirting board to the correct length and angle. You have the option of purchasing pre-cut baseboards or cutting them yourself. Cut the first board carefully with a handsaw or miter saw, making sure the bottom ensures the perfect fit to your wall. It’s essential to verify that the cutting angles are accurate, so the skirting boards will sit flush in the corners.

 

  1. Install the skirting board

Finally, it’s time to install your skirting board. Apply the adhesive to the wall’s back and rear of the skirting board, then press the board onto the wall. This process is about as critical as measurement in terms of ensures a perfect finish. Be sure to use sufficient nails as necessary for a long-lasting attachment.

Measurement of skirting board installation is a crucial step in achieving a neat and professional finish. It ensures accurate fitting and alignment with the walls and corners, which leads to an outstanding appearance, whether you like to DIY or hire a trained installer. Also, having the appropriate tools, materials, and methods for installation are necessary, and cutting the skirting board to the precise length, with the appropriate joints, to enhance the room’s aesthetic better. With these tips, you can easily master the measurement process and install skirting boards like a pro.